Revision as of 10:47, 13 December 2013

Pentesting Smart Grid and SCADA with SamuraiSTFU by Justin Searle

Course Abstract

This is not your traditional SCADA security course! This course teaches hands-on penetration testing techniques used to test embedded electronic field devices, network protocols, RF communications, and controlling servers of ICS and Smart Grid systems like PLCs, RTUs, smart meters, Home Area Networks (HAN), smart appliances, SCADA, substation automation, and synchrophasors. This course is structured around the formal penetration testing methodology created by the National Energy Sector Cybersecurity Organization Resource (NESCOR), a United States Department of Energy project. Using this methodology and SamuraiSTFU (Security Testing Framework for Utilities), an open source Linux distribution for pentesting energy sector systems and other critical infrastructure, we'll perform hands-on penetration testing tasks on embedded electronic field devices, their RF communications, and the myriad of user interfaces used throughout smart grid systems. We’ll tie these techniques and exercises back to the smart grid devices that can be tested using these techniques. We will also do exercises on dissecting and fuzzing smart grid protocols like modbus, DNP3, IEC 61850, ICCP, ZigBee, C37.118, and C12.22. The course exercises will be performed on a mixture of real world and simulated devices to give students the most realistic experience as possible in a portable classroom setting.

Advances in modern ICS systems such as the energy sector’s "Smart Grid" brings great benefits for electric utilities and customer alike, however these benefits come at a cost from a security perspective. With increased functionality and addition inter-system communication, the smart grid brings with it a greater risk of compromise that both utilities and customers must accept to realize their desired business benefits. To minimize this risk, penetration testing in conjunction with other security assessment types must be performed to minimize vulnerabilities before attackers can exploit the critical infrastructures that exist in all countries around the world.

Course Prerequisites

Basic penetration testing experience is desirable, but not required. It is assumed that attendees will have no knowledge of ICS, Smart Grid, SCADA, or critical infrastructure. This course is designed for intermediate level security professionals, be they engineers, technicians, analysts, managers, or penetration testers.

Recommended Reading before the Course

1. For those with little or no ICS experience, these Wikipedia articles provide a brief introduction to the concepts and history of control systems that will be helpful to know for class.

• http://en.wikipedia.org/wiki/ICS
• http://en.wikipedia.org/wiki/SCADA
• http://en.wikipedia.org/wiki/Smart_grid

2. http://nostarch.com/xboxfree - While this has nothing to do with control systems, it provides a great introduction to the concepts and techniques taught in this class to pentest embedded electronic hardware in ICS field/floor devices.

3. http://csrc.nist.gov/publications/nistir/ir7628/nistir-7628_vol3.pdf - Chapter 7 of the NIST Interagency Report 7628, titled Bottom-up Security Analysis of the Smart Grid, provides a great overview of the challenges faced in Smart Grid and energy sector systems, many of which we are testing for and exploiting in this class.

Resources You Are Responsible to Bring

1. Laptop with at least two USB ports (three ports preferred). If you

only have two USB ports and they are right next to each other, you will need to bring a USB extension cable.

1. Latest VMware Player, VMware Workstation, VWware Fusion installed.

Other virtualization software such as Parallels or VirtualBox will probably work if the attendee is familiar with its functionality, however VMware Player should be prepared as a backup just in case.

1. Ability to disable all security software on their laptop such as

 Antivirus and/or firewalls

1. At least twenty (20) GB of hard drive space
2. At least four (4) GB of RAM

Resources Provided at the Course

1. Power for your laptop
2. Internet connectivity may or may not be available depending on the

 facility hosting the course

1. Latest version of SamuraiSTFU (Security Testing Framework for Utilities)
2. PDF version of the course slide deck
3. Student hardware kits to use in class that must be returned at the

 end of class

1. List of hardware items in the student kits and links to where

 students can purchase their own kits

Course Outline

Day 1 – Pentesting ICS Network Protocols

Introduction to SamuraiSTFU (Security Testing Framework for Utilities)

• Setting up the virtual machine
• Walk through the tools and functionality
• Introduction to the student hardware kits

Different levels of network communication penetration testing

• Testing of network mediums vs network protocols
• Where security defenses should be place …… and tested

Serial communications

• RS-485 and RS-232
• Modbus RTU
• 16-bit unsigned registers and single bit coils

Pentesting RF communications between master servers and field devices

• Hands-on RF spectrum analysis and signal capture
• Spread Spectrum types and strategies
• Hands-on signal demodulation with GNU Radio
• Hands-on network traffic extraction
• Traffic transmission and exploitation

Pentesting TCP/IP based ICS protocols

• Protocol capture and analysis
• modbus, DNP3, IEC 61850, ICCP, ZigBee, C37.118, and C12.22
• Dealing with unknown protocols
• Hands-on entropy analysis of network payloads
• Reverse engineering unknown protocols
• Hands-on ICS protocol fuzzing

Day 2 – Pentesting ICS Field and Floor Devices

Pentesting technician interfaces on ICS field and floor devices

• Functional analysis of field technician interfaces
• Hands-on exercise capturing USB communications to tech interfaces
• Hands-on exercise analyzing captured USB communications
• Impersonating endpoints in field tech interface communications
• Hands-on exercises fuzzing AMI Smart Meter c12.18 optical interfaces
• Exploiting vulnerabilities found during analysis

Analyzing field and floor device firmware

• Obtaining field and floor device firmware
• Hands-on exercise disassembling firmware
• Hands-on exercise analyzing disassembled firmware
• Exploiting firmware flaws

Overview of pentesting field and floor device embedded circuits

• Local attack through physically exposed devices
• Expanding physical attacks to remote attacks
• Cryptographic keys and firmware

Analysis of embedded electronics in ICS field and floor devices

• Discussion of device disassembly
• Component analysis on embedded circuits
• Datasheet acquisition and analysis for target components

Day 3 – Pentesting ICS Field and Floor Devices Continued

Dumping data at rest on embedded circuits

• Using the Bus Pirate and other similar tools
• Overview of I2C or two-wire serial protocol
• Hands-on exercise dumping I2C EEPROMs
• Overview of SPI serial protocol
• Hands-on exercise dumping SPI EEPROMs
• Overview of JTAG
• Hands-on exercise interfacing with JTAG

Bus Snooping on embedded circuits

• Overview of bus snooping
• Hands-on exercise snooping busses

Analyzing data obtained from data dumping and bus snooping

• Hands-on exercise doing string analysis of datasets
• Hands-on exercise doing entropy analysis of datasets
• Hands-on exercise doing systematic key searches through datasets
• Hands-on exercise doing file carving from datasets

End-to-end analysis and reporting

• Strategies for end-to-end analysis after targeted pentesting
• Strategies for reporting and remediation recommendations

Conclusion

Trainer Biography

Justin Searle is a Managing Partner of UtiliSec, specializing in Smart Grid security architecture design and penetration testing. Justin led the Smart Grid Security Architecture group in the creation of NIST Interagency Report 7628 and played key roles in the Advanced Security Acceleration Project for the Smart Grid (ASAP- ). He currently leads the testing group at the National Electric Sector Cybersecurity Organization Resources (NESCOR). Justin has taught courses in hacking techniques, forensics, networking, and intrusion detection for multiple universities, corporations, and security conferences. Mr. Searle is currently a certified instructor for the SANS Institute. In addition to electric power industry conferences, Justin frequently presents at top international security conferences such as Black Hat, DEFCON, OWASP, Nullcon, and AusCERT. Justin co-leads prominent open source projects including the Samurai Web Testing Framework (SamuraiWTF), the Samurai Security Testing Framework for Utilities (SamuraiSTFU), Middler, Yokoso!, and Laudanum. Justin has an MBA in International Technology and is a CISSP and SANS GIAC certified Incident Handler (GCIH), Intrusion Analyst (GCIA), and Web Application Penetration Tester (GWAPT).

More information is available on Meeas Security blog

@meeas

http://www.utilisec.com

23 - 25 April (09:00 - 17:00)

Back to Training Overview