View source for Philip Polstra - Autonomous Remote Hacking Drones

From BruCON 2017

← Philip Polstra - Autonomous Remote Hacking Drones

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in the group: Users.

You can view and copy the source of this page.

To get the most from the workshop attendees should bring the following:
* A BeagleBone Black Rev B or Rev C
* 32 GB Class 10 or faster microSD card
* An Alfa AWUS036H wireless adapter (or another adapter compatible with aircrack-ng)
* Two Xbee or Zigbee adapters from Digi (must be from same series: 1, 2, or ZB.  Regular or Pro edition w/ at least 1 recommended to be a Pro edition.  Pro and Regular adapters can be mixed and matched within the same series)
* A laptop running Linux that can be used to write to a microSD card.
* A USB Xbee adapter such as the ones by Adafruit, Sparkfun, or Parallax
* XBee cape or mini-cape (these can also be home made at a later time)
* 5V 1A Power adapter with 2.1 x 5.5 mm barrel connector (2A recommended for using a touchscreen)

Attendees without the hardware listed above will still get something out of the workshop, but will not be able to leave will fully configured hacking drones.  At a minimum, bringing a microSD card is recommended to save the pain of downloading a 6GB archive from SourceForge.net.  The uncompressed system image is 12GB+, hence the need for a 16GB or larger microSD.  The automation techniques should be applicable beyond use in the hacking drones described in this workshop.

Return to Philip Polstra - Autonomous Remote Hacking Drones.

Retrieved from "https://2017.brucon.org/index.php/Philip_Polstra_-_Autonomous_Remote_Hacking_Drones"

navigation

SEARCH

TOOLBOX

LANGUAGES

View source for Philip Polstra - Autonomous Remote Hacking Drones

From BruCON 2017